ZIPCO® is not one product. It is a family of boards and pallets made for very different jobs, from concrete formwork to brick machines to container floors to modular kitchens. What ties them together is how they are made and checked: raw material selection, moisture control, thickness checks and batch test documents.
This article walks through the eight sectors we supply, the ZIPCO® products used in each, and the quality point that matters most there.
Key Takeaways
- Each sector has a different failure to avoid: delamination in formwork, bending in pallets, breaking floors in transport, swelling in wet areas.
- ZIPCO® products are checked per batch, and lab test reports, density logs and quality check stamps are provided on request.
- Choose the grade for the job. A waterproof bond is not needed in a dry wardrobe, and an interior grade should not go into formwork.
- Each sector below links to a page with the full product table and FAQs.
What Is Common to Every ZIPCO® Product
Quality control is built into our manufacturing lines: core veneer selection, moisture calibration and final thickness sanding, with each batch monitored for structural consistency. The checks we state are a 72-hour boiling water test, digital thickness checks (±0.15mm), moisture control between 8% and 12%, and dynamic stress and load testing. Which checks apply depends on the product; the details are in how ZIPCO® products are tested.
Eight Sectors, Eight Different Priorities
Why Matching the Grade Matters More Than the Brand Name
Choosing ZIPCO® does not mean choosing the most expensive board. It means choosing the right grade within a tested range. In formwork that is a film faced board with a waterproof bond. In pallets it is a type and thickness matched to the block. In interiors, MR 303 is economical for dry areas and PF 710 is for kitchens and bathrooms; MR vs BWP explains the difference. Using the right grade in each place avoids both failure and over-spending.
The wrong choice is expensive in the other direction too: see why cheap shuttering plywood costs more and how to identify good brick pallets.
Supply Terms
- MOQ: for wholesale trade and exports, standard MOQ starts at one full truck load or a 20ft container equivalent.
- Lead time: standard production takes 7 to 15 days from order confirmation, plus transit.
- Custom sizes: custom lengths, widths and calibrated thicknesses for formwork boards and block machines.
- Documents: lab test reports, density logs and quality check stamps with every batch.
- Export: container loads with palletised packing. State your destination port and preferred Incoterm.
Frequently Asked Questions
Why choose ZIPCO® products?
Which sectors do you supply?
Are ZIPCO® and OJA® the same brand?
Do you supply outside Gujarat and outside India?
Need a bulk quote?
Share your thickness, size, quantity and delivery location. Our trade desk replies with specifications and pricing for domestic and export orders.
